MaixHub Machine ID Generate Steps

Machine id usage

  1. Download the model


  1. Model training

Generation steps

  1. Download key_gen.bin


  1. Use kflash_gui to burn the firmware ken_gen.bin to the development board.

Warning: consider for encryption, key_gen.bin will close JTAG port FOREVER, and write one-off AES KEY, please accept it and then burn it.

  1. Open the serial port and the baud rate is 115200,8,N,1. Press the reset button to see the machine code.


  1. Copy and save the machine id: 96c7031ecc54a525c583cb4cb1394c36